Our Filter nozzles and Filter nozzles-stars are made of polypropylene. Depending on the drop in pressure for example at 60 degree Celsius (333 K) Polypropylene (PP) is resistant against:

1. ammonia ag 10%

2. Formaldehyde ag 10%

3. isopropanol all concentrations

4. methanol ag 50%

5. caustic soda solutions 50%

6. hydrochloric acid 50%

7. sulfuric acid 50%

8. soda water

9. ozone 20 degrees Celcius, 50pphm (0,5ml/L)

 

• Polypropylene is physiologically unobjectionable.

• With increasing frost polypropylene gets more sensitive. Please, handle all articles made of polypropylene accordingly. If it is cold we recommend to warm up filter nozzles and nuts before installation.

• For hot water of a continuous temperature of up to max 135 degrees Celcius depending on the drop in pressure we recommend PVDF. (Conditionally resistant to concentrated caustic solutions).

 

             Color of slots (PP)

• 0,2 = ivory

• 0,3 = green

• 0,35 = white

• 0,5 = grey

• 0,7 = yellow

• 0,8 = blue

• 1,0 = black

• 1,5 = orange

• 2,0 = green

 

• Tightening torque see at installation instruction.

• 1mWS = approx. 0,1 bar

• Threads in approach of DIN ISO 228 for G, BSP ANSI B1.20.1-1983 for NPT, NPSM ANSI B1.1a-1984 for UN.

• Dimensions in mm.

• Error/Pressure failure we reserve the right to alter specifications.

• No responsibility is taken for the correctness of the technical information. Only specifically provided data sheets are valid.